Therefore, you can connect the mobile device to the EAP’s wireless network and find the controller’s IP address on the DHCP server. Note: A DHCP server is needed as shown in Build the Topology to allocate an IP address to the EAP. If the controller cannot be found, tap + on the upper-right corner and enter its IP address and port to add the controller manually. By default, the username and password are both admin. Then tap the controller and enter the username and password to launch the controller. Open the Omada app, tap Local Access at the bottom and wait for the controller to be discovered. Then enter the username and password and click Log in to launch the controller.ġ) By default, the username and password are both admin.Ģ) To get the IP address of Omada Cloud Controller, check the DHCP server (typically a router).ġ) Connect your mobile device to the EAP’s wireless networkįind the default SSID (format: TP-Link 2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the EAP, and connect your mobile device to the EAP’s wireless network using the default SSID. (For Omada Cloud Controller) Launch a web browser, enter the controller’s IP address in the address bar and press Enter (Windows) or Return (Mac). (For Omada Software Controller) Double click the software icon and wait for a while to open the web browser. Then enter the username and password and click Log in to launch the controller. Step 1 Launch the Management Page Locally → Next step: Adopt EAPs with a Wired Connection Remotelyįollow the instructions below to launch the management page and adopt EAPs locally. → Next step: Adopt EAPs with a Wired Connection Locally Network Topology for Adopting EAPs Remotelyįigure 5 Topology for Managing EAPs Remotely Power LED will be on when the Cloud Controller is powered on (For Omada Cloud Controller) The controller should be powered on and in the same subnet with EAPs. The computer is called Controller Host which can also be used as a management computer. (For Omada Software Controller) The controller should be running on a computer in the same subnet with EAPs. EAPs are powered on, and a router acts as a DHCP server to assign IP addresses to them.įigure 3 Topology for Managing EAPs Locally via a Computerįigure 4 Topology for Managing EAPs Locally via a Mobile DeviceĪccording to the controller you use, notice that: Network Topology for Adopting EAPs Locallyįigure 3 and Figure 4 show the topologies for managing EAPs locally. Controllers are both available for computers and mobile devices.ġ) To log in via a computer, you are recommended to use the latest version of Google Chrome, Firefox, IE or Safari.Ģ) To log in via a mobile device, download the Omada app first.īased on the access way and method you use, the following introduces network topologies for adopting EAPs locally or remotely. Management devices are the devices used to log in to the controller. For the Linux system, refer to User Guide in the Download Center. For other operation systems, you are recommended to install a virtual machine on the computer so that you can run Omada Software Controller on it.Ģ) This article takes the Windows system as an example. Management Platformīoth Omada Software Controller and Omada Cloud Controller can be used to manage EAPs.ġ) Omada Software Controller only supports the Windows and Linux systems. To learn how to choose one based on your needs, refer to Methods for Managing Omada EAPs Network. Choose a management platform to manage the EAPs and a management device to log in to the platform.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |